Categories

Site Information

Categories

Pages

 Loading... Please wait...

Blog

KMP Accessories & BuyFoxBodyParts.com, Fox Body Mustang Garage Build - Road to SEMA 2017

Posted by Kevin W. on

We have all had that one love when it comes to cars. For our owner that love has always been the Fox Body Mustang. This is one of the longest running body styles to date, from 1979 to 1993, a whopping 14 years! So now on to our story. This joint venture "Garage Build" between BuyFoxBodyParts.com and KMPAccessories.com came about a few months ago when we were finally able to get to work on our Project '92 Vert which we now have dubbed the Weekend Cruiser (aka: The wife's car). We obtained this car from a small family run car lot in Indiana where when first seen looked like this car was a little worse for wear. The convertible top was not in the best of shape, the cloth seats were very faded but overall ok, and of course the carpet had seen its better days. We took this car for a test drive and were amazed at how good it road. A small problem we had noticed though while on the road test was that the transmission did not seem to have overdrive. Not a big deal to us because we have plans to swap it to a manual anyway.

With the purchase made, we drove the little convertible back home and let it sit in the garage to relax for a little while in its new home. We would take it out occasionally for a little weekend cruise through the back roads of Ohio visiting some of our friends and enjoying the good times.


After about 6 months, some of the transformations started to take place. We removed the anemic automatic transmission from behind the 2.3L  4-cylinder engine and prepped the car for its manual conversion. With a new clutch and flywheel sourced, and a spare clutch pedal assembly we had lying around, the swap commenced. We removed the knee panel cover and brace to gain access to all of the bolts to be able to drop down the steering column. With the steering column lowered to the floor and out of the way we removed the factory brake pedal assembly and installed a freshened clutch / brake pedal assembly. Installed a new adjustable clutch cable and quadrant kit (Part # 15055) from BuyFoxBodyParts.com and got everything installed in an afternoon. We also turned our attention the the ragged out looking convertible top. We sought out the assistance from a local upholsterer in the Cincinnati area that did a great job making our little car look so much better. Now we could enjoy the car for a little while shifting the gears till the next phase came along. Well that next phase wouldn't happen for about a year, with a move across country that would pause the next upgrades for a little while.

Now that the move is complete, the faded cloth seats started to bug us a little bit. We contacted our friends at TMI and ordered a set of period correct vinyl upholstery and new front seat foam for the driver and passenger as well as new Crystal Blue Carpet. What an amazing improvement. The look of this car was really starting to transform.

With the convertible top and the interior complete for now, we needed to do a little more to the outside of the car so we turned our attention to the wheels. The rubber coated 14 inch wheels that Ford put on was just not going to cut it for the plan of this car and the 4-Lug hubs were a little dated as well. We needed an upgrade. On the front end of the car we wanted to do a couple of basic upgrades, but looking to the future we wanted to do a simple upgrade to start off this build, with bigger plans in the future that would make the next upgrade to the front brakes and suspension a little easier. With this in mind we installed a new set of Monroe Monro-matic Struts for basic street driving and ride comfort mated to a set of SN95 Front spindles and a pair of SN95 Front Lower Control Arms, with a pair of SN95 GT Calipers and Rotors for some improved stopping power. Next we moved to the rear of the car. With a plan to upgrade the rear axle in the not so distant future, we went with a common inexpensive upgrade to by doing an axle and drum swap. Using 2 right side axles from a ford ranger, and the rear drums we were able to retain the factory 7.5 inch rear housing and get the look we were after, and finished it all off with a set of factory 5-star wheels from a 2001 Mustang GT. So for now, the basic 5-Lug swap complete.

(March 2017) Now the real work begins. There has been a lot of planning over the past few years. We were at a bit of a break with our Convertible Weekend Cruiser Project with a lot going on and a new addition to our family. Now that family life has settled down , it is time to focus back on Project '92 Vert, our Garage Built Weekend Cruiser. We have got some big plans in store for this fun little ride. Now for the news that some may already know... Swap Time! 

We have gone back and forth on the idea of which way to go with our swap. Since this car is originally a 2.3L 4-cylinder car, we had considered heavily on taking that route by going with the new 2.3L EcoBoost engine, but with so many parts being available that are off the shelf items for other years of Mustangs, it makes the most sense to go with the "Swap of Greatness" by doing a 5.0L Coyote Swap. We acquired our Coyote engine used via our local Ford Dealer and started laying out our plan as to how we want to take the build. So here it is, we are going to keep the car looking stock per say. The body on this car is in almost excellent condition. The paint is barely faded and when washed and waxed looks amazing. The rear will need an upgrade to handle the added power as will the transmission, the poor t-5 that we have just won't cut the mustard. We have started with removing the existing engine from the engine bay and all of the unwanted items that we will not use. In addition to that we removed all of the engine bay harnesses and clips as well as the wiper motor so we could prep the engine bay for some replacement front inner fender panels purchased from the kind folks at Scott Rod Fabrication who know how to make quality parts. We did remove the front bumper cover, front fenders and hood so once the front inner fender panels are welded in and completely installed, the engine bay will be completely repainted to a bright factory finish thanks to the team at Karl Malone's Body & Paint. Check out some of the pictures below to see the progress of the bodywork

Thanks for reading, In the coming weeks we will be adding more updates and pictures of the build as we go and get ready for the engine swap and start traveling down the road to SEMA 2017.

The Power Wheels S550 Mustang, featuring traction and stability control.

The Power Wheels S550 MustangThe S550 Mustang has been one of the most popular Mustangs of all time. It has broke many sales records and appealed to more customers than ever before. Most recently with all of the rumors floating around of a mid-cycle refresh, it is no wonder that Ford has decided to partner [...]

Read More »


Velgen Wheels, Popular and In Demand

Velgen wheels are some of the most popular wheels to date for many vehicles esepically for your Ford Mustang with a wide variety of styles and their new Classic5 design. The clean and classic five-spoke design is featured on the deepest concave wheels in Velgen’s lineup and offered in a wide variety of colors. check out [...]

Read More »


Nitrous Express EcoBoost Mustang Nitrous Plate System

Nitrous Express releases 2.3L EcoBoost Plate SystemFor EcoBoost owners looking to give their vehicles a shot in the arm during races, the Nitrous Express 4 Cylinder Ford EcoBoost Plate System features spraybarless technology for the ultimate in atomization and distribution.The billet plate bolts between the throttle body and intake making installation quick and easy and the [...]

Read More »


The Development of the Ford Mustang

While the Ford Mustang had an eventful beginning as one of the most successful product releases in the history of automobiles, it has grown tremendously in the last 52 years, and it only continues to outstrip its competition. This year the Mustang topped the pony car sales charts, beating the Camaro and the Challenger by a [...]

Read More »


The Birth of the Ford Mustang

The Ford Mustang is a beautiful car that has lasted more than half of a century, and is still one of the best selling vehicles on the market. By combining the aesthetics of a muscle car with the affordability of a sedan, it’s no wonder why the Mustang takes the cake for pony cars in [...]

Read More »


Our Line Of Mustang Restoration Parts

With the Ford Mustang, it’s about style, performance, and most importantly, power. Regardless of whether you are driving the newest Shelby GT350® or a 1979 Mustang, you want auto parts you can count on to increase your car’s value and help it perform. At KMP Accessories, we make it our business to help you take [...]

Read More »


Mustang Parts For Sale: What Makes KMP Different

When there are Mustang parts for sale everywhere online, only KMP Accessories offers the kind of quality you need at a price you’ll love, taking the headache out of the part-buying process. From our customer service to our experience to our parts selection, everything we do sets us apart from our competition. Customer Service Our customers are [...]

Read More »


Ford Takes Home 3 out of 4 SEMA Hottest Vehicle Awards (courtesy semashow.com)

This year’s SEMA Award for the top trending vehicle models in four categories was announced Tuesday, November 3, at the SEMA Show. The Ford Mustang was named Hottest Car, the Ford Focus took the Hottest Sport Compact honors, the Ford F-Series won Hottest Truck and the Jeep Wrangler received the Hottest 4x4-SUV award.“Traditionally, the SEMA [...]

Read More »


SEMA 2015 Comes to an End..

Well we had a great time in Vegas attending the SEMA Show! Was excited to finally meet Rey Rivera and his lovely wife of Juggernaut Power, thanks to my buddy Rodney Black for making the trek from Cincinnati and glad to meet the team from Diode Dynamics. Look forward to doing business with you in the future! 

Read More »